If Your Hot Water System Abruptly Stops Working: What to Do
If Your Hot Water System Abruptly Stops Working: What to Do
Blog Article
They are making a few great points regarding How to Troubleshoot and Repair an Electric Water Heater as a whole in the article directly below.
Numerous modern houses utilize an electric water heater for their heating system, as a result of its ease as well as simplicity of use. Nevertheless, just like any other electrical devices, issues may arise with its use, all of a sudden. It can be truly aggravating to wake up to a cool shower rather than a hot one or having your bath with water that isn't warm sufficient and even as well hot. Whatever the instance might be, water heater problems can be quite aggravating. The good news is, we have actually made a listing of possible services to your water heater issues. There are a number of factors that can trigger a number of these problems, maybe a problem with the power supply, the electrical burner, or the thermostat. Prior to doing anything, guarantee you turn off the major power supply for security. Whatever the problem is, getting it fixed must not position way too much of a problem if you follow these steps:
Examine Your Power Supply:
As fundamental as this might seem, it is very required. Without adequate power, your water heater will not operate. So the first thing to do when your water suddenly stops working is to validate that it isn't a power problem. Check if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the problem, merely turn it on and off once again. Change any type of busted or worn-out fuse. Examine the appliance with power after these modifications to see if it's now functioning.
Check the Heating Element in the Water Heater:
If it's not a power issue, then try looking into your burner if it is still functioning. Check each of your heating elements to ensure the problem isn't with any of them. If any one of them is malfunctioning, change that component and then inspect whether the hot water is back on.
Inspect Your Thermostat:
If your water heater still isn't functioning or the water appearing isn't warm sufficient, you may need to examine the temperature settings on your upper thermostat. Guarantee the circuit breaker is turned off before doing anything. Open the accessibility panel as well as press the red button for temperature reset over the thermostat. This should assist heat up the water. Transform the circuit breaker back on and also check if the issue has actually been resolved.
Call An Expert:
If after changing all malfunctioning parts and resetting your temperature level, the hot water heater still isn't functioning, you might require to contact an expert plumber for an expert point of view. The trouble with your heating unit could be that the hot and cold taps have actually been changed or it might be undersized for the amount of hot water required in your house. Whatever the case may be, a professional plumber would assist fix the trouble.
Conclusion
Water heater issues are not constantly major. A number of them result from small concerns like a blown fuse or worn-out burner. Changing the faulty components need to suffice. Nonetheless, if you are still incapable to address the trouble, give a call to your nearby plumber to find to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I hope you liked our piece on What Would Cause My Electric Water Heater to Stop Working?. Many thanks for taking time to read our article. Loved our write-up? Please share it. Help others check it out. Many thanks for your time. Visit again soon.
Quick, quality, call! Report this page